|
|
Electrolytic Systems |
Note: To view the data sheets below, Adobe Acrobat needs to be installed on your computer. If you do not have Adobe Acrobat software, please download a free copy.
|
|
ML-27Application: Recommended for minilabs, professional labs, commercial labs, and school photofinishers. ML-27 treat all combinations of RA-4 and EP-2 bleach-fix, C-41, C-41B, C-41 RA fixers, and E-6 fixer.Washless stabilizers may also be desilvered. These systems can be plumbed directly to processor fix/
bleach-fix overflow lines, or silver-bearing chemicals may be easily added via an integral funnel assembly.
Expected Results: ML-27 units reduce silver content to approximately 100 ppm (mg/l). Tailed with a Trickle TankTM & Vault-I metallic exchange cartridge, each unit can reduce silver content to less than 5.0 ppm (typically 2.0 ppm or less).
Product Data Sheet |
|
 |
|
|
SilvPAC LM BF 15 & 20SilvPAC LM/BF-15 and LM/BF-20 stationary cathode silver recovery systems are designed for professional, commercial,
and mini labs. These innovative units desilver EZ bleach-fix (regenerated RA bleach-fix), or NR type bleach-fix combined with low-flow wash and overflow C-41 fixer. E-6 may also be added to the above processing solutions.
The LM/BF-15 is ideal for large volume mini labs to desilver bleach-fix,
washless paper stabilizer, fixer, and washless film stabilizer.
Product Data Sheet
Service Manual |
|
 |
|
|
SilvPAC LM BF 55SilvPAC Low Maintenance Bleach Fix (LM/BF) units provide the most efficient electrolytic silver recovery on the market. LM/BF units are engineered to desilver EZ bleach-fix (regenerated RA bleach-fix), NR type bleach-fix combined with low-flow wash, overflow C-41 fixer and E-6 processing solutions.
Designed for large photofinishing, school photofinishing, and professional labs, CPAC’s LM/BF units combine bleach fix desilvering with reduced maintenance costs. Additionally, LM/BF units use a filtered power supply, and
are capable of recovering up to 97% of available silver using a batch process.
Product Data Sheet
Service Manual |
|
 |
|
|
SilvPAC RS LM 90The RS/LM-60, RS/LM-90, and Dual RS/LM-90 are designed for large photofinishers, school
photofinishers, professional labs, and motion picture labs. These versatile units may be used as
recirculation systems connected directly to the processor to reduce fixer usage by as much as 75%.
The patented stationary cathode design eliminates the brushes, bearings, and motors required for rotating cathode units, so maintenance costs are significantly reduced. The flexible split-seam cathode can be removed from the unit, desilvered, cleaned, and re-installed in minutes, providing an increase in efficiency.
Product Data Sheet |
|
|
|
|
SilvPAC XLM 400B & SilvPAC XLM 600RSilvPAC XLM (Extra Capacity - Low Maintenance) units provide the
most efficient electrolytic silver recovery on the market.
The XLM-400B is engineered to desilver up to 2,000 gallons per day
of EZ bleach-fix (regenerated RA bleach-fix) or NR type bleach-fix
combined with low-flow wash, overflow C-41 fixer, and E-6 processing
solutions. The XLM-600R is designed for large photofinishing,
school photofinishing, and motion picture labs using a closed-loop
fixer recirculation system.
Product Data Sheet
Service Manual |
|
 |
|
|
ARU-2100RCPAC, the world’s leading manufacturer of silver recovery and pollution control systems, introduces ARU-2100R. This unique electrolytic silver recovery system uses IMG’s well-known, silver-sensing electronics. Combined with closed-loop operation, these electronics efficiently desilver fixer in a processor’s working fixer tank. The results are consistently high silver yields without sulfiding the fixer.
Product Data Sheet
Application Notes
Service Manual |
|
 |
|
|
